TRL6227

PICMG 2.16 Compliant, Dual P3/Tualatin CPUs, 64 bit, 66MHz cPCI Single Slot Processor Card    

·         PICMG ® 2.16 Compact Packet Switching (cPSB) compliant dual 10/100 Base-T Ethernet ports 

·         PICMG ® 2.1 Hot Swap Specification compatible  

·         CompactPCI bus supports up to 7 bus master slots with Intel 64bit 66MHz bridge interface to back plane

·         Dual Tualatin and Pentium3 processors up to 1.5GHz

·         One PMC slot at 64bit 66MHz  

·         Up to 2Gbytes PC133 SDRAM ECC DRAM

·         Up to 576M Bytes of on-board CompactFlash® flash memory

·         Two EIDE bus with provisions for primary EIDE hard drive using an onboard 2mm 44 pin header

·         Optional on-board EIDE drive adapter for 2 devices

·         Video display with 2MB or optional 4MB memory accessible from front and rear panel on P5

·         Watchdog timer with user selectable reboot and operation selection

            (PHOTO AVAILABLE SOON)

·         Floppy interface on an rear I/O transition adapter

·         Two Universal Serial Bus

·         Two high speed RS232 or optional 422 serial ports

·         One bi-directional LPT port

·         Optional rear I/O transition adapter interface from J3 and J5

·         System status monitor for temp sensor

·         User-Defined Thermal Settings for adjustable CPU clock rate and critical stop clock limits

·         Support for all MS Window OS, QNX, VxWorks, Linux and Sun Solaris x86    

A single slot (4HR) dual CPU Card with the cPCI bus driven by a 64-bit, 33/66MHz PCI to PCI Bridge and supports up to seven bus master slots. Integrated with PICMG 2.16 cPSB compliant Dual 10/100BaseT network ports. The primary 64-bit 66MHz PCI bus is available for the on-board PMC connector and PCI Bridge. The TRL 6227 fully supports one or two Intel Tualatin and Pentium3 processors providing the latest computing power for the user. Auto configuration of split voltage devices is supported, allowing jumper-less use of many versions of CPUs with performance to 1.5GHz. The LE PCI chipset from ServerWorks is designed to maximize throughput on the PCI bus. It is capable of burst mode transfers to 220 Mbytes per second between PCI and main memory. It also supports PC133 SDRAM and error correction (ECC) memory providing the highest data protection. Jumper-less setups of interrupt requests and configuration options are configurable through the BIOS setup screen. User-defined temperature and time settings for adjustable CPU clock rate and critical system shutdown limits are designed for maximum thermal protection and the highest equipment MTBF performance.

COMPACT PACKET SWITCHING

PICMG ® 2.16 Compact Packet Switching Backplane (cPSB) compliance on dual 10/100 Base-T Ethernet ports with optional front panel access.

HOT SWAP

TRL 6227 allows hot swap compliant add-on boards on the cPCI bus to be removed or inserted with power on. Individual clocks for each slot on back plane must be provided. Add-on boards access to the back plane ENUM# signals are required to be in compliance with the PICMG 2.1 Hot Swap Specification. The TRL6227 is designed to inserted or removed in a powered system.

THERMAL MANAGEMENT

With external forced air-cooling and with adequate ventilation, cooling is achieved with an integrated heat sink. Built in with environment sensors, the TRL 6227 is rated for 0° to 55° C operation up to 1.5GMHz processor.

DRAM PERFORMANCE

Total capacity up to 2Gbytes of PC133MHz SDRAM on two DIMM socket is used for high performance. Optional Error Correcting (ECC) DRAM is available for improved reliability and data integrity.

FLASH MEMORY

TRL 6227 comes with up to 2Mbits of on board flash memory for system BIOS. Optional user defined application flash memory can be upgraded up to 576M Bytes on a CompactFlash socket.

CACHE MEMORY

The processor contains internal Level one (L1) cache memory. Level two (L2) cache is provided on-board the Intel CPU module.

ON BOARD PERIPHERALS

The TRL6227 contains many PC standard on-board peripherals, making it a very powerful stand alone single board computer as well as a sophisticated main cPCI processor. In addition to the standard keyboard, timers, real-time clock, two serial (16550) ports and IEEE-1284 bi-direction parallel ports, it also contains two Enhanced IDE (EIDE) controllers, a mouse port, a floppy controller and four Universal Serial Bus (USB) ports.

VIDEO DISPLAY PORT

The display port provides an on-board highly integrated video processor with 2MB or optional 4MB memory supporting up to 1280x1024 resolution.

WATCHDOG TIMER

The watchdog timer can be set by the user to monitor system operation. Failure of the data to strobe the watchdog timer within a fixed time period will provide auto power-on reset for the system.

ENHANCED IDE INTERFACE

TRL 6227 provides support for two integrated PCI-based Enhanced IDE (EIDE) controllers. The primary EIDE provides the option for two IDE devices integrated on the Peripheral Device Carrier board. It is mounted on the TRL6227 to become a two-slot configuration. Both the primary and secondary EIDE channels are available through the rear-panel I/O J3 connector.

FLOPPY INTERFACE

An on-board floppy disk controller provides the option for an integrated floppy disk drive. The floppy disk drive signals are routed to the rear-panel I/O J3 connector for off-board support.

KEYBOARD AND MOUSE

The TRL6227 supports a PS/2 style keyboard and mouse connector at the front panel as well as through the rear-panel I/O J3 connector.

SWITCHES AND INDICATORS

System power-on reset switch are accessible from the front panel. LED’s are provided on the front-panel for EIDE activities, Ethernet negotiation and speed status, system power status, CPU activities and optional user defined functions.

BACK PANEL I/O CARD

The TRL 6227 brings most I/O signals out of the rear of the board on J3 and J5. These signals can be connected via a rear-panel 6U transition board TRL 1215.

PMC EXPANSION SLOT

The built-in 64-bit 66MHz PMC slot makes the TRL6227 configurable for a wide range of system requirements.

PERIPHERAL ADAPTER

The optional Peripheral Adapter mounted on top the SBC to be integrated as a three-slot configuration. The Adapter can accommodate two EIDE devices such as LS120/240 floppy drive, CDROM and hard drives or flash IDE drives.

SOFTWARE SUPPORT

The TRL6227 comes standard with AMI BIOS.  Options are available for OS boot files loaded to on-board flash. The BIOS is user configurable to boot up from local flash memory, a fixed or floppy drive or over a network. The flexibility of the BIOS allows the TRL6227 to operate in many configurations to support all popular operating systems such as all MS Windows OS, QNX, VxWorks, Linux and Sun Solaris x86.